瑞士EMPA测试用品
瑞士国家联邦材料测试与开发研究所(EMPA)是世界检测行业最具权威的机构之一,测试产品多达上千种,符合ISO,IUF,VESLIC,ADIDAS等标准,广泛应用于皮革企业,汽车内饰行业,制鞋行业,纺织行业等领域。EMPA Testmaterialien AG于2014年1月1日更名为Swissatest Testmaterialien AG

EMPA PVC受色膜 PVC溢色膜原装瑞士进口受色膜溢色膜 PVC受色膜

产品型号:EMPA PVC受色膜    点击次数:8362
依据标准:符合标准:ISO 15701,VESLIC C-4420/UF442,ADIDAS等,在ADIDAS FT-02渗透色牢度(Migration Fastness)标准中被规定使用.
产品详细说明

EMPA PVC膜为瑞士原装进口,型号:EM-727,又称PVC受色膜,PVC溢色测试膜,用于各类鞋业材料的移色测试.

 

符合标准:ISO 15701,VESLIC C-4420/UF442,ADIDAS等,在ADIDAS FT-02渗透色牢度(Migration Fastness)标准中被规定使用.

 

原装规格:10片/包,100mm*150mm,每片可裁10块,50mm*30mm.

 

EMPA 承诺保证聚氯乙烯膜的有效期为2 年。

 

 

 


聚氯乙烯膜必须长期储存在干燥、黑暗、标准室内环境性处理的地方。
 
确定染料从试样渗进聚合物–例如聚氯乙烯(PVC)或聚氨酯(PU)的可能性
 
测试步骤
1. 掀开聚氯乙烯膜的“光亮面”的保护层,确保这已掀开保护层的一面用于测试.
2. 将试样摆放在聚氯乙烯膜的中心位置.如果是一件试样,便把它放在聚氯乙烯膜的中央,如果是2 件试样,便按图1 所示摆放.
3. 将聚氯乙烯膜连同上面的试样一起放到一块玻璃片的中心位置,然后在上面盖上另一块玻璃片.
4. 将夹着试样的两块玻璃片放到支架上.
5. 如果多于一件试样,可重复上述步骤,用玻璃片把试样隔开.
6. 在玻璃迭层上放45 牛顿的砝码(对于被测的皮革表面来说,4.5 公斤相当于0.75 巴), 然后将已压上砝码的玻璃迭层放入烘箱中, 在摄氏50 度±2 度的温度下烘16 小时.
7. 在加热老化处理后将装置从烘箱中取出,取走砝码,并让玻璃迭层在室内温度(摄氏23 度±2 度)中放2 小时.
8. 将试样与聚氯乙烯膜分离
 
测试鉴定:用灰色卡(1至5级)对比聚氯乙烯膜上最深色的位置

EMPA Testmaterials AG
Movenstrasse 12,CH-9015 St.Gallen
Talon with 10 segments of soft PVC Foil
If the degrss of color diffusion is to be controlled through to the reverse side of the foil,then directly after the sample has cooled to room temperature
the PVC foil from the card and then remove silver protective film.
Art.727:Talon with 10 segments of standard soft PVC Foil according to ISO 15701/IUF 442
For the testing of color migration from leather into Poly Vinyl Chloride
Cut away the required number of segments shortly before use,beginning with NO.1. Next remove the silver protrctive film on this side and bring the PVC foil
into contact with the leather specimen.

Copyright © 2014 SUNDATEST.COM , All Rights Reserved. 粤ICP备14015397号
地址:广东省东莞市南城区袁屋边工业区 电话:0769 - 2298 0894 邮箱:sundatest@163.com